| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Installation
1. Embark on a flawless installation journey by thoroughly examining each component of the machine. Ensure all fasteners are tightly secured to promise unparalleled performance and reliability. Should any be found loose, tighten them immediately to maintain the utmost efficiency.
2. Enhance your operational setup by placing the machine on a stable, even surface, carefully selected away from busy areas. This thoughtful positioning boosts both safety and operating proficiency, setting a standard of excellence.
3. Fortify safety measures by rigorously grounding the machine at its designated point. This critical action guards against electrical hazards, offering seamless protection for users.
4. Incorporate an all-pole disconnecting device like a knife gate, ensuring the cable is securely attached to the machine. This pivotal step is essential for sustaining uninterrupted and smooth performance.
5. With the knife gate securely fastened, activate the switch handle to conduct an initial test run. A tranquil, flawless operation is an affirmation that the machine is finely primed for effective use.
Operating procedures:
Mixing:
To achieve flawless dough, start by placing flour into the dough bucket, then add 50% water. Mix for around 5 minutes until the dough reaches the perfect consistency. If the mixture adheres to the mixing blades, a slight dusting of dry flour will resolve this. Important safety reminder: Never insert your hand into the machine while in operation!
Maintenance protocol:
1. Regularly check all fasteners during operation to ensure they remain secure. Prompt tightening of any loosened parts is crucial to maintain the machine's structural strength and integrity.
2. Avoid overfilling the dough drum with flour to prevent potential motor damage and ensure optimal performance.
3. Should you notice oil stains on the dough, immediately service the machine to replace the oil seal, thereby preserving its pristine condition and impeccable performance.
Cleaning:
1. Thoroughly clean the machine after each use to maintain its prime condition and readiness for future endeavors.
2. During cleaning, be cautious that water levels do not exceed the shaft's lowest point inside the noodle barrel. This precaution prevents overflow and prolongs the lifespan of the side plate.
3. As a drip-proof appliance, avoid using a spray hose for cleaning to prevent any possible damage.
| Model | Power | Voltage/Frequency | Capacity/Net Weight | Face hook rotation speed | Noodle drum speed | Product size |
| YF-SD20 | 1100W | 220V/50Hz | 20L/83KG | 100/200R/min | 6/13r | 40x73x88cm |
| YF-SD30 | 1500W | 220V/50Hz | 30L/92KG | 100/200R/min | 6/13r | 43x80x91cm |
| YF-SD40 | 2200/3000W | 220V/50Hz | 40L/140KG | 100/200R/min | 6/13r | 49x86x96cm |
| YF-SD50 | 2200/3000W | 220/380V/50Hz | 50L/150KG | 100/200R/min | 6/13r | 49x86x96cm |
| YF-SD60 | 3000W | 220/380V/50Hz | 60L/190KG | 100/200R/min | 6/13r | 58x97x114cm |
| YF-SD80 | 3000W | 380V/50Hz | 80L/215KG | 100/200R/min | 6/13r | 58x97x114cm |
| YF-SD100 | 4000W | 380V/50Hz | 100L/260KG | 100/200R/min | 6/13r | 69x115x127cm |
| YF-SD130 | 5000W | 380V/50Hz | 130L/280KG | 100/200R/min | 6/13r | 69x115x127cm |
| YF-SD200 | 7000W | 380V/50Hz | 200L/440KG | 100/200R/min | 6/13r | 75x124x130cm |
Q: Are you a manufacture or trading company?
A: We are a manufacturer and we have got permit of import and export as well.
Q. What's payment terms ?
A: Bank T/T,Alipay, wechatpay.
Q: Do you accept small orders ?
A:Yes. If you are a small retailer or starting up business, we are definitely willing to grow up with you. And we are looking forward to co-work with you for a long term relationship.
Q: Do you have inspection procedures for the products?
A: 100% self-inspection before packing.
Q: Can I have a visit to your factory before the order?
A: Sure, your visit is welcome at any time.
){kind=link}